3
Figure # 5
BUILT IN ENCLOSURE GENERAL BUILDING PROVISIONS:
When installing the
Alfresco
™ Pizza Oven as a built-in unit, careful consideration to the materials
used must be made. As a general rule, the materials and construction methods should be the same as
the requirements for an outdoor fireplace while maintaining all local building codes.
The image on the right, Figure # 4, shows how the
Alfresco
™
Pizza Oven might look like in a built-in configuration.
When building the pizza oven into a non-combustible structure, it
is critical to have access to the bottom of the unit. This will be the
only means of service and maintenance as the oven will no longer
be removable.
Alfresco
™ recommends installing an AB-30 double sided door
for service, storage, gas supply and electrical power access.
The Pizza Oven must rest on two 2” ledges to give it proper sup-
port and must have free air intake from the bottom of the oven.
The built-in construction should have ample ventilation under the
oven in order to have the proper combustion.
Dimensions shown on Figure # 5 below are shown as reference
to aid in the design and planning only.
Figure # 4
