DEFINITIONS
Access Card
The Access Card operates the Lock. They can be added on the lock in Master Mode Menu, and deleted
in Master Mode Menu or in Alfred Home App. You can assign an Access Card to specific members
within the Alfred Home App. Maximum Number of Access Card is 250.
Privacy Mode(Inside Deadlock)
Enable by holding the Multi-function button on the Back assembly of lock for 3 Seconds. Enabling
this feature restricts ALL accesses, including Master PIN Code, User PIN Code, Alfred Home App
Access and Wireless accesses(Zigbee or Z-wave). This feature is designed to be used when the User
is home and within the house but wants to restrict any other users from being able to unlock the door,
for example when sleeping at night once everyone that is supposed to be home is within the house.
The feature will disable automatically by unlocking door using thumb turn or override key.
Bluetooth Energy Saving Mode:
Bluetooth Energy Saving Feature can be programmed in Settings options on the Alfred Home App
or in Master Mode Menu at the Lock.
Enabling Energy Saving Mode - means Bluetooth will broadcast for 2min after keypad lights turn
off on Touchscreen Panel, after the 2min expires the Bluetooth feature will go into energy savings
Sleep mode to reduce some battery draw. The front panel will need to be touch to wake up the lock
so the Bluetooth connection can be re-established.
Disabling Energy Saving Mode - means Bluetooth will stay active continuously to create quicker
connection If user has enabled One Touch Unlock Feature in Alfred Home App, Bluetooth must been
Enabled as the One Touch feature requires constant Bluetooth connect availability to function.
Reboot button
In the case where your lock becomes unresponsive, the lock can be restarted by pressing the Reboot
Button on the Front Assembly (see diagram on Page 14 for location) This will keep all lock settings
in place but will restart the lock.
Reset button
After Lock as been Reset, all User Credentials and settings will be deleted and returned to factory
settings. Locate the Reset button on the Interior Assembly underneath Battery Cover and follow
Reset instructions on Page 15 (see diagram on Page 3 for location). Connection with Alfred Home App
will remained, but will remove connection with Centered Control Platform.
6/15