Seite | 9
TIMER (set operating time)
-
- You can activate the timer function in any operating mode by pressing the "TIMER"
button. After pressing the "TIMER" key, the display shows "Hr" for hours and "00" for
the number of hours. The display "Hr" lights up during the complete timer operation.
Before programming, make sure that the timer function is not already activated (the
display must not show "Hr").
-
By repeatedly pressing the "TIMER" button, you can set the desired operating time in 1-
hour intervals up to a maximum operating time of 24 hours. Pressing the "TIMER"
button at the maximum operating time of 24 hours resets the timer to 00 hours.
-
To change the timer setting during timer operation, press the "TIMER" button. By
pressing the "TIMER" button again, the operating time can be increased by one
additional hour of operation.
-
To cancel the timer operation, press the "TIMER" key repeatedly until 00 is displayed as
the operating time. The display "Hr" for the timer mode will then go out.
-
The operating time starts automatically after the desired value has been entered. Your
dehumidifier stops operation as soon as the specified number of operating hours has
been reached.
-
The timer operation mode is stopped when the water tank is full. As soon as the water
tank is emptied and correctly reinstalled in the appliance, the timer operation is
automatically continued until the previously set number of hours has elapsed.
AIR CLEAN
-
Press the "Air Clean" button to activate the air cleaning function. The key indicator lights
up during operation of this function.
-
The air is cleaned by a plastic prefilter on the back of the unit. This filter can be used
without restriction as long as it is not damaged. Please clean the prefilter regularly (e.g.
by carefully vacuuming with a vacuum cleaner).
-
For improved air cleaning, we recommend the use of an additional air filter fleece, which
you can optionally purchase in our shop (see page 11).
-
The compressor of the dehumidifier is thus switched off. No dehumidification takes
place in this operating mode. You can set the speed of the fan as desired (level 1 low /
level 2 high).
