Seite | 10
HUMIDITY SETTINGS
-
-
You can set the desired humidity in the range of 30% - 80%. Press repeatedly to
increase the setting value at 5% intervals.
-
Once the maximum value of 80% has been reached, pressing the key again will restore
the minimum value of 30%.
-
This setting can only be selected in "Automatic dehumidification" mode. The
dehumidifier stops dehumidification automatically as soon as the value falls below the
selected value and restarts if necessary and continues the dehumidification function.
FAN-SPEED
-
Use the FAN SPEED button to select the desired fan speed. There are two operating
levels for this: Low and high speed levels are shown on the display.
-
The fan speed can only be selected in the operating modes "Automatic
dehumidification" and "Air Clean" (air cleaning). In the "Permanent dehumidification"
operating mode, the fan automatically runs at a low speed. In the operating modes
"Heavy drying" and "Clothes drying" the fan automatically runs at a high level - a
manual change of the fan speed is not possible in these operating modes!
SLEEP (Nachtmodus)
-
After pressing the "SLEEP" button, the sleep mode is activated. This turns off the
display illumination and the color indicator for humidity. Please select the desired fan
speed before activating the sleep mode, as far as this is possible in the selected
operating mode. You can also reduce the operating noise of the dehumidifier by
selecting the small fan speed beforehand.
-
By pressing the button again, the sleep mode is deactivated.
-
The dehumidifier resumes its normal operating mode and the display is reactivated.
POWER/STAND-BY (Ein-/Ausschalter)
-
Press this key to start the dehumidifier.
-
Press the key again to switch off the unit.
