Seite | 11
Insertion of an additional air filter fleece in the dehumidifier:
Warning: Switch off the appliance and disconnect the power supply.
Remove the cover (filter holder) from the rear oft he dehumidifier by
pulling the handle provided.
Before installation, remove the air filter fleece from its packaging and
place it in the filter holder provided. The additional air filter fleece is
inserted into the holder so that the coarser plastic prefilter remains
on the outside of the plastic grille.
Replace the filter holder in the unit by first inserting the two fixing
straps on the top into the eyelets of the dehumidifier and then
pressing the filter cassette lightly against the bottom of the unit until
it clicks into place.
You can order the air filter fleece comfortably in the double pack (2
pieces) under the article number 159712 in the online shop of the
manufacturer:
https://www.allergiker-shop-alfda.de
This is a coarse dust filter of filter class G3 with a separation of 80% - 90% for particles >10 µm
(e.g. construction site dust). In addition to air cleaning, this fleece also provides additional
protection against soiling for your dehumidifier during normal dehumidification operation. The use
of the optional air filter fleece reduces the air throughput compared to the use without fleece.
Please note that the CLEAN-AIR function of the dehumidifier and the coarse dust filter used are
NOT
HEPA-filters, which are usually used for air cleaning by allergy sufferers. If required, we
