ALF-MMX1616-N
18
6.3. RS232 Communication Command
With this command system, users are able to control and operate the matrix with
RS232 software remotely.
Note:
Please disconnect all the twisted pair CAT6 cables before sending command
EDIDUpgrade[X].
In the commands, “[”and “]” are symbols for easy reading and do not need to be
typed into the actual operation.
Please remember to end the commands with the ending symbols “.” or “;”.
Type the command carefully as it is case-sensitive.
Commands pertaining to EDID only avails for signal cards that support EDID
management.
The matrix boasts 6 built-in EDID data, the chart below illustrates the detailed
information:
No. Detailed Information
1
1080P 2D 5.1CH
2
1080P 2D 2.0CH
3
720P 2D 5.1CH
4
720P 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH
Update built-in EDID data by sending command
UpgradeIntEDID[x].
.
Communication protocol:
Baud rate: 9600;
Data bit: 8;
Stop bit: 1;
Parity bit: none.
