ALF-MMX1616-N
30
Controlled by PC(s) in LAN
The matrix can be connected with a router to make up a LAN with the PC(s), this
enables it to be controlled in a LAN. When controlling, just make ensure the matrix’s
network segment is the same as the router. Connect as per the below figure for LAN
control:
Step1.
Connect the TCP/IP port of the matrix to the Ethernet port of the PC with a
twisted pair.
Step2.
Set the PC’s network segment to the same as the matrix. Do please
remember the PC’s original network segment.
Step3.
Set the matrix’s network segment to the same as the router.
Step4.
Set the PC’s network segment to the original one.
Step5.
Connect the matrix and PC(s) to the router. In the same LAN, each PC can
control the matrix synchronously.
It is now able to control the device via TCP/IP communication software.
