ALFATRON ALF-12X-NDIC, ALF-20X-NDIC and ALF-30X-NDIC
24
Dynamic range:
set the dynamic range (default 5,0-8 optional).
Shutter speed:
active when it is status of manual or shutter-priority (default 1/100
，
1/25
、
1/30
、
1/50
、
1/60
、
1/90
、
1/100
、
1/120
、
1/180
、
1/250
、
1/350
、
1/500
、
1/1000
、
1/2000
、
1/3000
、
1/4000
、
1/6000
、
1/10000 optional).
Aperture value:
Set the aperture value, active when it is status of manual or aperture-priority(default F1.8,closed, F11,
F9.6,F8.0,F6.8,F5.6,F4.8,F4.0,F3.4,F2 .8,F2.4,F2.0,F1.8 optional).
Brightness:
Set the brightness value, active when it is a state of brightness priority (default 7,0-23 optional).
color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue gain can be
set.
White balance modes:
Set the white balance mode (the default automatic,3000K,4000K,5000K,6500K, manual,
One-push optional). Note: Click the “Correction” button when selected the One-push white balance mode.
Saturation:
Set the saturation (default 80%,60%,70%,80%,90%,100%,110%,120%,130%, optional).
Auto white balance Sensitivity:
Sensitivity Auto white balance settings (default is low, high, medium optional).
Chroma
: Set the chrome (default 7,0-14 optional).
Color Temperature:
set color temperature (Default setting: High, with low, middle for options)
Red Gain
: Set the red gain, effective when it is manual (default 255,0-255 optional).
Blue Gain:
Sets the Blue gain, effective when it is manual (default 199,0-255 optional).
d. Image: Brightness, contrast, sharpness, black and white mode, the gamma curve, Horizontal Flip and Vertical
Flip can be set.
Brightness:
Set the brightness (default 6,0-14 optional).
Contrast:
set the contrast (default 8,0-14 optional).
Sharpness
: Set the sharpness value (default
7
, 0-15 optional).
Black and white mode:
Set black and white mode (default color, black/white optional).
Gamma
: Gamma value setting (default,0.45,0.50,0.52,0.55 optional).
Flip Horizontal
: Set Flip Horizontal (default Off, On optional).
Flip Vertical:
Set vertical flip (default Off, On optional).
e. Noise Reduction: 2D noise reduction,3D noise reduction and dynamic dead pixel correction available.
2D Noise Reduction
: Set 2D noise reduction level (default Auto,1-7 and Off optional).
3D Noise Reduction
: Set 3D noise reduction level (default
5
,1-
8
and Off optional).
Dynamic dead pixel correction:
Set Dynamic dead pixel correction (default Off,1-8 optional).
Note: Click “Refresh “to make revision of any video parameters of a, b, c, d, e effective.
4) Character-Overlapping
Display date and time:
Set whether to display the time and date (default display).
Display Title:
Set whether to display the title (default display).
F
ont Color of Time:
Set font color of time and date (default white, black, yellow, red, blue
optional).
F
ont Color of Title:
Set font color of title (default white, black, yellow, red, blue optional).
Moving characters
: Set the display position of moving date, time and title, click on the "up, down, left, right"
buttons to move the corresponding character position.
Title Content:
Set title content (default CAMERA1).
Time Content:
Set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message, then valid
5)Character Size
Mainstream character size: Set the character size of the display, the device will restart
automatically after changed and saved (default 24,24,16 optional)
Secondary stream character size: Set the character size of the display, the device will restart automatically after changed
and saved (default 16,24,16 optional)
Click on the "Save" button to display "Parameter saved successfully" message, set to take effect
6)Video output
Output Format: Set the video output format (default
1080P60,1080P50,1080P30,1080P25,1080I60,1080I50,720P60,720P50,720P30,720P25,1080P59.94,1080I59.94,1080P
29.97,720P59.94,720P29.97 optional).
Click on the "Save" button, it will be valid when display "Save successful".
4.2.6 Network configuration
1) Network port
Data port:
set the data port, the device will restart automatically after changed (default 3000,0-65535 optional).
Web Port
: Set Web port, the device will restart automatically after changed (default is 80,0-65535 is optional).
Onvif Port
: Set Onvif port, the device will restart automatically after changed (default 2000,0-65535 optional).
Soap Port
: Set Soap port (default 1936,0-65535 optional).
RTMP Port:
Set RTMP port (default 1935,0-65535 optional).
