19
1
2
3
To thoroughly clean the glass ceramic, we recommend a cloth sprayed with a small amount of a suitable detergent to
be used to remove the dirt (see Figures 1 and 2).
Never spray detergent or any other liquid cleaner directly on ceramic glass (see Figure 3).
NEVER use abrasive sponges or similar products to clean the ceramic glass, as they may cause irreparable damage.
⚠
ATTENTION: Make sure to seal the doors each time you open them to clean the ceramic glass.
5.1.3
ROUTINE MAINTENANCE, ACTIVITY TYPE 1
These activities should be done at least twice a week, depending on conditions of use.
After some time of using the furnace, the user may specify the appropriate frequency of cleaning and maintenance of
the furnace.
⚠
ATTENTION: Each cleaning activity has to be performed when the furnace is completely cold and disconnected from
the power supply (with the cable pulled out from the socket).
Number of maintenance activities is increasing in proportion to the intensity of the use of the furnace.
⚠
ATTENTION: Be sure that ash is completely cold before you start cleaning. Once you conclude that the ash is cold,
you may vacuum it with a vacuum cleaner.
Periodic maintenance Type 1 shall be performed in accordance with the following procedure:
1.
Slowly open the furnace door so that the accumulated ash does not fly around due to the fast movement.
2.
Remove the mesh.
3.
Remove the pellet protection and the burner.
4.
Using a vacuum cleaner and a wire brush (or other sufficiently abrasive material) to clean the ash and other
debris from the burner, because these impurities prevent the passage of air.