Press the
right button
and wait for the
arrows up
and
down
, to set your speed limit alarm.
Press the
left button
to set and pass to the next menu.
Tip: When driving and entering the pits, press the
right
button
, then
left button
to view your speed. If your
speed is OVER your preset speed limit, your UPPER
LEDS will flash.
Press the
left button
to leave this menu.
For this configuration:
1/ You will need RPM & speed sensors as your gear posi-
tion is calculated from a ratio of speed to RPM
2/ Your engine must be running and your wheels turning
(ie: Put your kart on a stand or drive your vehicle)
Press the
right button
to choose the number of gears on
your engine and to set that number press
left button
.
Now you are in the configuration of your 1st gear.
As soon as you reach a targeted RPM level (ie: 2500
RPM) and stabilize yourself at that level, press the
right
button
, change to the next (2nd) gear and get to the same
RPM level (ie:2500) stabilize & press the
right button
again. Repeat for all gears.
When finished to accept the gear settings (at the menu
“OK”) press the
left button
or use the
right button
to
begin again.
Press the
left button
to set and pass to the next menu.
Toll Free:1 (877) 462-7296
www.Alfano-usa.com
11
PITS SPEED LIMIT ALARM
GEAR POSITION (NUMBER OF GEARS)
GEAR POSITION (NUMBER OF GEARS)
GEAR POSITION (TO SET EACH GEAR RATIO)
