14/37
ALFA IN a.s ©
www.alfain.eu
after 5 s of inactivity, the
machine switches back to the
cutting current setting
V5
Cutting modes
active after 2 short presses of
encoder
V1
change the mode by turning
encoder
V1
; the selection does
not need to be confirmed, it
will be saved automatically
after 5 s of inactivity, the
machine switches back to the
cutting current setting
Cutting solid material
Cutting of perforated material
Grooving
V6
Change of units
active after 3 short presses of
encoder
V1
change units by turning
encoder
V1
; the selection does
not need to be confirmed, it
will be saved automatically
after 5 s of inactivity, the
machine switches back to the
cutting current setting
V7
Display brightness
active after 4 short presses of
encoder
V1
change the value by turning
the encoder
V1
, the selection
does not need to be
confirmed, it is saved
automatically
