Alfa Romeo MiTo Blue&Me Nav, Manual

Page: 93 / 122

92 92 92
TROUBLESHOOTING
Problem Probable Cause Possible Solution
Display screen shows: PAIRING FAILED
Or the system says “Bluetooth pairing
timed out. Please try again later.”
Display screen shows:
INCOMING CALL PRIVATE
NUMBER
Display screen shows: FUNCTION
ENABLED ONLY WHEN VEHICLE
STATIONARY
Or the system says:
“This function is only available
when the vehicle is stationary”
Retry the pairing procedure. During the
PIN entering step, verify that the PIN
number you are entering on the mobile
phone is the same number that is shown
on the instrument panel display
SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE
Enter a contact in your mobile
phonebook for the incoming call,
and then download your phonebook/
contact again
In this case, nothing can be done and
the message will always appear
Stop your car and attempt to perform the
function again manually, or continue
driving and perform the function using
the voice recognition system
After three minutes, each attempt to en-
ter the PIN number fails since
pairing timed out
❍
The caller is not recognized as a name
stored in the phonebook,
and the paired mobile phone does not
have a called ID feature
❍
The caller has blocked caller ID
to prevent the system from
displaying the caller’s name
and/or phone number
Even occasional short viewings of the
car display may be hazardous if your
attention has been diverted away from
your driving tasks. Certain
Blue&Me™
Nav functions, which require the user
to give attention to the car display, are
only available when the car is stopped
604_31_834 BeM MiTo NAV GB 13-05-2008 16:26 Pagina 92