Alfa Romeo MiTo Blue&Me Nav, Manual

Page: 27 / 122

26
HOW TO USE
Blue&me™ Nav
For the list of available keywords, refer
to section VOICE COMMANDS (KEYWORDS)
- SUMMARY.
To repeat the last system voice announce-
ment, press
‘
for longer than 1 second
or press shortly
‘
and pronounce “Re-
peat”.
The system can issue voice announcements.
A voice announcement is a spoken message
initiated by the system. To cancel a voice an-
nouncement, press
&
/ESC , or press
‘
and pronounce “Cancel”.
A voice interaction is a two-way communi-
cation/spoken exchange between system
and user. To initiate a voice interaction, press
‘
and issue a command. To interrupt an
ongoing interaction and start a new interac-
tion, press
‘
at any time during the inter-
action and issue a voice command.
To stop an ongoing interaction press
&
/ESC . You will hear a tone indicating
when voice recognition is deactivated.
The hands-free kit help option can speak the
list of commands available to you at any
time, depending on the keyword level that
you are currently on. To use the help sys-
tem, say “Help Listen to the list of current-
ly available commands and decide on which
command you’d like to issue to the system.
Adjust the volume of phone calls to a level
that is comfortable and safe while the car is
in motion. To adjust the default volume of
Blue&Me™ Nav , see paragraph “EXTER-
NAL AUDIO VOL function” in the sound sys-
tem owner handbook. To temporarily adjust
the volume of the current phone call, press
+ or – or adjust the position of the radio
knob. After the phone call is disconnected,
the volume will revert back to the original
level.
You can press + or – also to adjust the vol-
ume of the current Blue&Me™ Nav
voice announcement.
Please remember that to interrupt a voice
announcement, you can always press
‘
at
any time during a voice interaction and give
a new voice command.
*
Valid means that the keyword pronounced is included in the Blue&Me™ Nav
“dictionary” and that can therefore be recognized by
the system for the concerned level.
There is no voice training required for us-
ing voice commands with this system.
To issue a voice command to the system,
press
‘
and wait for the tone indicating
that voice recognition is active. Then, speak
the command in your natural voice at a mod-
erate pace. When the system recognizes the
command, it will acknowledge your com-
mand by speaking a response or acting on
your command.
Voice commands are organized according to
three increasing levels: 1
st level, 2 nd level and
3
rd
level.
When a valid* 1
st
level keyword is pro-
nounced, the system will activate 2 nd level
keywords; when a valid 2
nd
level keyword
is pronounced, the system will activate 3 rd
level keywords.
If the user pronounces a valid 1
st
level key-
word, then the submenu relevant to that
command will remain active until a keyword
leading to another level is given or the in-
teraction is interrupted; the same rule ap-
plies for the other lower levels (2
nd and 3 rd
level).
604_31_834 BeM MiTo NAV GB 13-05-2008 16:26 Pagina 26