Alfa Romeo Giulia 2020, Manual

Page: 88 / 104

87

"Visual": the system warns the driver that an
obstacle is present through warning lights
on the doors.

"Off": system disengaged.
Lane Departure Warning
This function can be used to select the "readi -
ness" of the Lane Departure Warning system
to intervene.
To make this adjustment, select the "Sensi
-
tivity" option: the options are "High" or "Low".
Lane Keeping Assist
This function can be used to select the "readi -
ness" of the Lane Keeping Assist system to
intervene.
The options available are:

"Mode": used to set the following operating
modes: "Warning and Brake", "Only
Warning", "Off" (where provided).

"Warning Type" can be used to set the
following operating modes: "Visual and
acoustic signal", "Visual and vibration",
"Acoustic and vibration".

"Sensitivity": this can be used set the "read -
iness" of the system to intervene, based on
the distance from the obstacle (the possible
options are "High" or "Low").

"Strength": this can be used to set the
"force" that the system must apply to the
steering wheel to warn the driver of the
need to keep the car in the lane (the
possible options are "High" or "Low").
Forward Collision Warning
This function can be used to select the
Forward Collision Warning system intervention
method.
The options available are:

“Status": allows you to enable/ disable the
system (if equipped).

"Mode": used to set the following operating
modes: "Warning and Brake", "Only
Warning", "Off" (if equipped).

"Sensitivity": allows you to set the "readi -
ness" of the system to intervene, based on
the distance from the obstacle (the possible
options are "Near", "Medium", "Far").
Traffic Sign Information
This function can be used to select the Traffic
Sign Information system intervention method.
The options available are:

"Blinking": this can be used to activate
("On") or deactivate ("Off") the flashing of
the road sign on the cluster display.

"Offset": this can be used to set the "delay"
of the Traffic Sign Information system
signals on the cluster display (from 0 to
5 mph or from 0 to 10 km/h).
Driver Attention Assist
This function can be used to select the "readi -
ness" of the Driver Attention Assist system to
intervene.
The options available are "Standard" or "High".
Intelligent Speed Control
This function can be used to select the toler -
ance with which the system sets the speed of
the Active Cruise Control device.
To make this adjustment, select the "Speed
Offset" option: the threshold is adjustable from
± 1 to 5 mph (or from ± 1 to 10 km/h).
Speed Limiter
This lets you activate/deactivate the function
warning that you have exceeded the set
speed.
Activate the function on the cluster display to
show the speed value.
20_AF_IES_EN_USC_t.book Page 87