Alfa Romeo 4C Spider 2015, User Manual, Page: 91 / 148

Confirming The Strength Of The SiriusXM Signal
You can check the signal strength through this setting item.
• Signal content
Setting Indicator
Setting Indicator:
This menu item displays the SiriusXM signal strength as Strong, Good, Weak or No Signal.
NOTE:
If the Signal Indicator reports Weak or No Signal and your vehicle is parked outside with no
obstructions to the southern sky, then your SiriusXM antenna may not be properly installed or may
have become damaged.
Checking The SiriusXM Radio ID Number
To subscribe to the SiriusXM Satellite Radio service, it is necessary to locate and identify the Radio
ID of your SiriusXM Tuner. The Radio ID contains 8 characters and can be found on the bottom of
your SiriusXM Tuner or can be displayed on when selecting Channel 0 by following the steps below:
1. While in the Satellite Radio Mode, press or to select channel “0.”
The unit displays “RADIO ID” and ID number at the same time.
NOTE:
The Radio ID does not include the letters I, O, S or F.
2. To cancel the ID number display, select a channel other than “0.”
Storing Channel Presets
1. Press BAND to select the desired band you want to store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of BAND changes the band: SiriusXM1, SiriusXM2, SiriusXM3 or SiriusXM1.
2. Tune to the desired channel, and then press and hold (for at least 2 seconds) one of the preset
buttons (1 through 6) to store the channel.
The display then shows the stored Band and preset number (for example, SiriusXM1-3 is
shown when preset 3 of BAND1 is selected).
3. Repeat the procedure to store up to 5 other channels onto the same band.
NOTE:
• A total of 18 channels can be stored in the preset memory, 6 Channels for each band
(SiriusXM1, SiriusXM2 and SiriusXM3).
• If you store a new channel into a preset which already has a channel assigned, the current
channel will be cleared and replaced with the new one.
E L E C T R O N I C S
89