Alfa Romeo 4C Spider 2015 User Manual Download Page 25

Page: 25 / 148

W I P E R / W A S H E R L E V E R

The Wiper/Washer Lever is located on the right side of the steering column.

Front Wipers

Intermittent, Low And High Operation

Rotate the end of the multifunction lever to the first detent position. There are four possible delays
intervals that depend on the vehicle speed.

Washer Operation

Pull the lever toward you and hold for as long as spray is desired.

Mist

Push the lever upward and release when a single wipe is desired.

NOTE:

The mist feature does not activate the washer pump; therefore, no washer fluid is sprayed on the
windshield. The wash function must be activated to spray the windshield with washer fluid.

Wiper/Washer Lever

1 — Washers
2 — Intermittent, Low And High Operation

O P E R A T I N G Y O U R V E H I C L E

Summary of Contents for 4C Spider 2015





















































































































































Search results

Summary of Contents for 4C Spider 2015

Reviews:

Alfa Romeo 4C Spider 2015, User Manual, Page: 25 / 148

Search results

Summary of Contents for 4C Spider 2015

Reviews: