ALP44 device operates in 2 different modes:
Programming mode
: Specifies the function used during programming.
Operating modu
: Specifies the function used during operating.
Display and Position LEDs
1.
4 Digit LED Display
at Operating mode
: PV :
Indication of process value
At programming mode
: Indication of program parameter
2.
4 Digit LED Display
at Operating mode: SV :
Indication of Set value.
At programming mode
: Indication of program parameter
3.
Out-1 output LED position: On while the power at Out-1.
4.
Out-2 output LED position: On while the power at Out-2.
5.
Set-1 Led position: On while Set-1 value is displayed in the bottom display
6.
Set-2 Led position: On while Set-2 value is displayed in the bottom display.
7.
LED of TARE
: LED status of Tare (Absolute/Relative) Function.
Button Functions
8.
PROG Button
Operating Mode:
Used to return to the menu with Tare button.
Programming Mode:
Used to save and enter menu parameter value.
9.
ESC Button
Operating Mode:
Used to show the maximum value measured with Tare Button.
Programming Mode:
Used to exit without saving the entered value of the parameter.
10.
SET 1/2
Operating Mode:
Used to in the bottom display to show the value of Set-1 and Set-2.
Down Button
Programming Mode:
Used to switch between the menus and decrease the value of
the selected parameter.
11.
TARE Button
Operating Mode:
Used to reset the entered point value.
Up Button
Programming Mode:
Used to switch between the menus and decrease the value of
the selected parameter.
3.
DESCRIPTION OF FRONT PANEL
- 5 -
