+
-
+
-
+
in
-
L
N
Supply Voltage
24 VAC / DC or
85 / 265 VAC
0-10 V, 4-20 mA or RS232 TX output
0 V (GND)
Span setting
outputs
These output are optional. These
terminals are open, if is not
specified when ordering.
COM
NO
COM
NO
NC
OUT
2
OUT
1
+24V
Supply
0-10V input
0 V (GND)
+24V
Supply
4-20mA input
0 V (GND)
ALP44P
ALP44V
ALP44A
SAFETY WARNINGS
1.
Follow the instructions and warnings in the user guide.
2.
Please check the power supply type before connects energy to the device.
3.
Please the device mounted on panel against dangers of fall, snap, shake during working.
4.
Make Sensor connections without energy on the device; do not connect in any way during
operation.
5.
Make sure that is shielded cables between device and sensor.
6.
Do not leave the device exposed to a heat source (solar, heater etc.)
7.
ALC44 industrial control device is not suitable for use in the external environment, Use only
room conditions.
8.
Wipe with a damp cloth to clean the device, do not use water, thinner etc.
9.
Comply with the limit values specified in the technical specifications for relay outputs.
10.
The device cannot be changed by the user in the event of a fault, Please contact our technical
service in case of failure.
2.
CONNECTIONS
1 8
2 9
3 10
4 11
5 12
6 13
7 14
- 2 -
