Hysteresis value can be entered using this menu to device. Hysteresis value’s purpose prevents from
vibration of relay contacts when device reaches the set point. In order to entered Hysteresis value, should
be entered programming mode with prg button and found hysu and hysd menus with up-down button.
The right-digit is flashing when pressed to prg button; you can set wanted value with up-down button.
Each press of the button moves to the left in a digit. Then you can save them.
Password security enables that unauthorized persons is prevented to change the parameters of the menu.
When Nset option is selected, entered to a password (SPS1). Password is not required while setting the set
values. Password is required for others setting. While Secu menu is all position, entered also password
SPS2. Then entered to device menu and parameter values can be displayed. Pass2 (SPS2) is required when
set values are prompted to make any. Pass1 (SPS1) is required at others situations. If password is incorrect,
you cannot make any change. Password is not requiered while secu menu is off. SPS1 menu is added to
menu titles while Secu menu is nset position. SPS2 menu is also added when selected option of All. In order
to open Secu menu, entered to programming menu. Found Code_in menu with up-down button and the
right-digit is flashing when pressed to prg button, you can set wanted value with up-down buttons. Then
you can save them.
4.10. ENTERING OF HYSTERESIS
(Hysu, Hysd)
.
.
PRG button is pressed, bottom row menu content flashes. Change to choice
with up-down buttons.
When pressed to Prg button,
moves to the left in a digit.
Save selection with prg button.
.
4.11.
Password Protection
(Secu)
.
.
PRG button is pressed, bottom row menu content flashes. Change to choice
with up-down buttons.
When pressed to Prg button,
moves to the left in a digit.
Save selection with prg button.
The right-digit is flashing when
pressed to prg button; you can set
wanted value with up-down button.
Then you can save them.
Open while Secu menu is nset
position. Used to changing
parameters of menu.
Open while Secu menu is nset
position. Used to changing sets
of menu.
- 10 -
