manualshive.com logo in svg

Alfa Laval Tri-Clover 741 Series, Service & Installation Manual, Page: 16 / 34

Share
Download
Alfa Laval Tri-Clover 741 Series Service & Installation Manual Download Page 16

- 16 -

MAINTENANCE

CAUTION

To prevent personal injury, DO NOT attempt to remove the
packing and bushing without the valve stem threaded onto
the actuator stem.  The stem is required because the
packing and bushing will be forced out of the actuator
under air pressure and will be trapped by the valve stem.

3

Apply 60 psig to the yoke.  The packing and bushing will be forced out which will result in an
air leak.  Remove air supply once the bushing and packing are forced out.

4

Remove the valve stem & yoke.

BUSHING / PACKING REPLACEMENT, NYLON LOCK REPLACEMENT AND LUBRICATION

IMPORTANT: The TYPE 80 actuator does not have a red indicating cap like the type 10, 20 or
30 actuator.  Cover the actuator stem threads with tape to protect the new bushing and packing
from damage during assembly.  

See Type 10, 20, AND 30 Actuator Maintenance.

Disassembly

1

Separate adjustment knob and cover plate by removing four bolts.

2

Remove E-ring and unscrew adjustment nut from actuator stem completely.

3

Remove spacer, end cap, bushing, retainer, and o-ring from actuator.

Assembly

1

Lubricate o-ring with L1011 Sanitary Silicone Spray.  Insert o-ring, retainer, and bushing into
actuator.

2

Install three o-rings into end cap.  Place end cap over actuator stem aligning air port labeled
MID with unthreaded thru hole in actuator.

3

Place spacer on top of end cap, screw adjusting nut on actuator stem, and install E-ring in
groove on actuator stem.

4

Align adjustment knob slots with adjustment nut.  Slide cover over spacer.

5

Place cover plate over adjustment knob and fasten with four bolts and lock washers.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Tri-Clover 741 Series



































Reviews:

No comments