5 Maintenance
Study the instructions carefully.
The items refer to the parts list and service kits section. Handle scrap correctly.
A/A = Air/air activated.
Service tool: see spare parts.
Step 7
Fit the aligning spindle to the actuator spindle, and then mount the socket wrench.
2200-0104
DO NOT DISASSEMBLE
kg
!
2200-0105
DO NOT DISASSEMBLE
kg
!
Aligning spindle
Socket wrench
Step 8
Now pull the aligning spindle to centre the actuator spindle. In this position rotate the bushing 180° backwards and then begin
to fasten the bushing. Make sure that the thread catches evenly!
The bushing must only be tightened with a torque of 10 Nm (7 lb-ft) which can be done by turning “hard” by hand.
2200-0106
DO NOT DISASSEMBLE
kg
!
33
