5 Maintenance
Study the instructions carefully.
The items refer to the parts list and service kits section.
Step 3
Drawing of "SSV Two step mounting tool"
1. Use ø32 mm bar and drill two ø4 holes in a diameter
ø26 mm.
(The depth of ø4 holes should be approx 6 mm)
2. Edges on ø32 bar has to be min. R0.5 so it can fit
into guide (54).
3. Use ø4 mm bar with a length of approx 10 mm.
4. Apply loctite 270 or 638 and fit the two ø4 pins so
length are according to drawing.
TD 461-650_1
DC Ø26
R0.5
Ø4 (pins)
(Ø32 bar)
4 1
+-
254 5
+-
40
