Instruction Manual, Gunclean Toftejorg TZ-75 Portable
Page 13
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A251-EN3
Installation and Normal Operation
(continued)
1.
Clamp machine firmly in a vice: Place machine on
top of vice with Hub w. nozzles down wards as
illustrated on the figure. Clamp on the Hub. To
protect machine use rubber jaws on the vice.
2.
Set torque wrench at the specified tightening
torque.
3.
Tighten nozzle with the torque wrench.
Recommended tightening torque: 75 Nm
4.
Check that the machine is in operating condition by inserting 3/16" hex Screwdriver (tool No.
TE134A) in screw in top of Turbine shaft and easily turn Turbine shaft clockwise. If any resistance
is recognised, the machine should be disassembled to localise the cause.