Description
Function
The heat exchanger consists of a pack of corrugated metal plates with portholes for the input
and output of the two separate fluids. The heat transfer between the two fluids takes place
through the plates.
The plate pack is assembled between a frame plate and a pressure plate and compressed by
tightening bolts. The plates are fitted with a gasket which seals the channel and directs the
fluids into alternate channels. The plate corrugation promotes fluid turbulence and supports the
plates against differential pressure.
Figure 2. Example of a single-pass set up.
Document ID
Language
Edition
3490017599
EN
2016-06
Instruction Manual - Plate Heat Exchangers
9
EN
Summary of Contents for FrontLine WideGap 100
Page 2: ......