Alfa Laval FrontLine WideGap 100, Instruction Manual, Page: 7 / 30

Description
Connections
Stud bolts Threaded stud bolts around the portholes secure the flange connections to the apparatus.
Multi-section
Partition plates
Solid carbon steel plates used in multi-pass configurations. Strengthens the turning
plate when needed.
Optional components
Foot Gives stability and is used to secure the heat exchanger with bolts to the foundation.
Protection sheets Cover the plate pack and protect against leakage of hot or aggressive fluids and the
hot plate pack.
Bolt protection Plastic tubes that protect the threads of the tightening bolts.
Insulation For applications where the heat exchanger surface will be hot or cold, insulation can
be used.
Lifting device Separate device that are attached on the heat exchanger used for lifting the heat
exchanger.
Earthing lug
An earthing connection is used to eliminate the risk of static electricity building up in
the equipment.
Nozzle cover Protection to avoid particles to enter into the heat exchanger during transportation.
Drip tray
Depending on the type of fluid in the heat exchanger and the type of installation, a drip tray
(drainage box) may be necessary to avoid injury to personnel and damage to equipment.
Document ID Language Edition
3490017599 EN 2016-06 Instruction Manual - Plate Heat Exchangers 7
EN