19
4. Maintenance
4.3 Assembly
Step 7
Fit valve body (16) in cover (7).
Step 8
CPMO-2:
Fit plug (15b) through valve body (16) and in the diaphragm
unit and guide (9) until the flange of the plug contacts lower
diaphragm (14).
Step 9
Fit top (3), washer (2) and top nut (1) on plug (15a or 15b).
Step 10
Fit and torque tighten clamp (6) to 10-15Nm
(7.5-11 lbf-ft).
Step 11
Pre-use check:
Lift and lower the valve top several times to ensure that the
valve operates smoothly.
Pay special attention to the warning!
10-15Nm
(7.5-11 lbf-ft)
