Alfa Laval Contherm 6X11, Instruction Manual

Page: 34 / 124

6 Installation
Figure 6-19. How to Connect Two Stack Valve Assemblies:
1 Stack valve hydraulic tubing connection. Refer to table 6-10 below for step-by-step instructions.
Figure 6-19. Connect Two Stack Valve Assemblies
If the Contherm
™
mounting assembly has been provided by Alfa Laval Inc., the location of the stack valve assembly on the
mount is predetermined at the factory. Otherwise, you must locate the assembly near the lower end of the Contherm
™
,
either on a mounting panel or an adjacent wall.
The procedure for installing the components of the Rotor Lifting Device is provided below. Refer to Figure 6-17 while performing
this installation.
34