Alfa Laval Contherm 6X11, Instruction Manual

Page: 20 / 124

6 Installation
6.2 Uncrating and Unpacking the Equipment
It is the user’s responsibility to report equipment damage during freight to the freight company responsible for the shipment. In
addition, contact Alfa Laval to receive any needed support.
NOTE: Scraping blades are not installed in the Contherm
™
to protect them during
shipment. Locate the scraping blades in the crate and store in a safe location until the
Contherm
™
is ready for operation. Refer to Chapter 8, Section 8.5.1 for instructions
on installing the scraping blades.
Identifying typical crate contents
Ttake note of all contents of every crate upon arrival. Seek out crates that hold spare parts and important documentation
(including thumb drive with electronic files) and ensure proper personnel promptly receives this information. Alfa Laval is not
responsible for lost items.
Table 6-1. Typical Contents of a Contherm
™
Crate
1 Drive motor(s). See lifting instructions below
2 Hydraulic lift pump (for vertical installations only)
3
Contherm
™
mounting cross arm (see mounting installation drawings)
4 Drive motor coupling components
5 Drive motor mounting plates (see mounting installation drawings)
6 Small parts box containing mounting hardware
7
Small parts box containing Contherm
™
start-up spare parts
8
Scraping blades shipped separately to protect during shipment. IMPORTANT: Blades must be installed prior to operation
9 Documentation (manual, drawings, certifications, packing list, etc)
10 Hydraulic tubing (for vertical installations only)
Figure 6-1. Typical Contents of a Crate
NOTE: Crates containing Contherm heat exchangers primarily contain just the Contherm.
Refer to section 6.2 and related images.
20