3 Installation
The instruction manual is part of delivery. Study the instructions carefully.
The Agitator is for permanent fastening.
Make sure the motor corresponds to the environment.
Check the direction of rotation before operation.
Step 7
3.4.4 See illustrations, 7.1, 7.2, and 7.5.3.
A. Press in the two “Guide Pin” pos. 13 into the “Console for Agitator”, pos. 4.
B. Press in the two “O-ring” pos. 31 and pos. 32 into pos. 4.
C. Mount the “Console for Agitator”, pos. 4 on the “Tube, CIP for Spray Ball” pos. 3.
D. Using the appropriate screws and Loctite
®
, the four washers pos. 22 and four nuts pos. 21 are sequentially tightened
to about 200 Nm.
15
Summary of Contents for ALTB-SB-20
Page 1: ...ESE03056 EN6 2020 05 Original manual Instruction Manual ALTB SB 20...
Page 2: ......
Page 73: ...73...
