[email protected]
Movil:959440045
5.2 Maintenance Logs
5 Service Instructions
50
5.2.2
Oil change
The oil change and check of worm gear should be
carried out every 1500 * hours of operation.
*
When using a group D oil, time of operation
between oil changes can be extended from the
normal 1500 hours to 2000 hours.
When the separator is running for short periods,
the lubricating oil must be changed every 12
months even if the total number of operating
hours is less than 1500 hours (2000 h).
In a new installation, or after replacement of gear,
change the oil after 200 operating hours.
See chapter
‘‘8 Technical Reference” on page
119
for further information.
Main component and activity
Part
Page
Notes
Worm wheel shaft and gear housing
Check
Worm wheel and worm
65
Renew
Oil * in gear housing
50
www.fdm.com.pe
Summary of Contents for 881145-09-01/7
Page 6: ...ventas fdm com pe fdmsac gmail com Movil 959440045 6 www fdm com pe...
Page 172: ...ventas fdm com pe fdmsac gmail com Movil 959440045 172 www fdm com pe...
Page 174: ...ventas fdm com pe fdmsac gmail com Movil 959440045 174 www fdm com pe...
Page 178: ...ventas fdm com pe fdmsac gmail com Movil 959440045 178 www fdm com pe...
