[email protected]
Movil:959440045
4.1 Operating routine
4 Operating Instructions
36
4.1.5
At full speed
1.
For
purification
mode:
a.
Supply water (206), approx. 1 liter
(depending on Gravity disc) to form the
water-seal. Continue until water flows out
through the water outlet (221). The water
should have the same temperature as the
process liquid and be supplied quickly.
b.
Close water feed.
c.
Start the oil feed slowly to avoid breaking
the water seal. Fill the bowl as quickly as
possible.
2.
For
clarification
mode:
a.
Start the oil feed with full flow. Fill the
bowl as quickly as possible.
3.
For both
purification
and
clarification
mode:
Check the separator inlet and outlet
pressures.
Adjust the oil outlet pressure to 1,5-2 bar.
For permissible pressures, see section
‘‘8.2
Technical data” on page 121
.
4.
Adjust to desired throughput.
G
087
751
1
Using water adding device, see
‘‘8.9.3 Water adding
device (option)” on page 150
www.fdm.com.pe
Summary of Contents for 881145-09-01/7
Page 6: ...ventas fdm com pe fdmsac gmail com Movil 959440045 6 www fdm com pe...
Page 172: ...ventas fdm com pe fdmsac gmail com Movil 959440045 172 www fdm com pe...
Page 174: ...ventas fdm com pe fdmsac gmail com Movil 959440045 174 www fdm com pe...
Page 178: ...ventas fdm com pe fdmsac gmail com Movil 959440045 178 www fdm com pe...
