Alfa IN PEGAS 400 E CEL Operating Manual Download Page 13 | Manualshive

Page: 13 / 13

Alfa IN PEGAS 400 E CEL Operating Manual Download Page 13

- 13 -

ALFA IN a.s. ©

www.alfain.eu

a. Equipment that has been modified by any other party other than

ALFA IN’s own service personnel or with prior written consent
obtained from ALFA IN Service Department.

b. Equipment that has been used beyond the specifications established

in the operating manual.

1. Installation not in accordance with the installation/operating

manual.

c. Any product that has been subjected to abuse, misuse, negligence

or accident.

d. Failure to clean and maintain (including lack of lubrication,

maintenance and protection), the machine as set forth in the
operating, installation or service manual.

6. Within this operating manual are details regarding the maintenance

necessary to ensure trouble free operation.

7.

NOTE

Warranty repairs must be performed by either an ALFA IN

Service Centre, an ALFA IN distributor or an Authorised Service Agent
approved by the company ALFA IN.

8. As a warranty list serves proof of purchase (invoice) on which is the serial

number of the machine.

10. DISPOSAL

Only  for  EU  countries.  Do  not  dispose  of  electric  tools  together  with
household waste material.
In  accordance  with  European  Council  Directive  2002/96/EC  on

electrical and electronic equipment waste and its implementation in accordance
with national law, electric tools that have reached the end of their service life
must be collected separately and returned to an environmentally compatible
recycling facility.

«
...
11
12
13

Summary of Contents for PEGAS 400 E CEL














Reviews:

No comments