12/24
ALFA IN a.s. ©
www.alfain.eu
V10
LED. If it lights, on the right display is shown voltage in V.
V11
LED. If it lights, on the right display is shown value of ARC FORCE.
V12
LED. If it lights, on the right display is shown time of DOWN SLOPE
in s.
V13
LED. If it lights, the machine is switched on.
V14
LED alarm (If it lights, in mains is overvoltage or undervoltage, or
the machine is overheated.)
V15
Encoder
Voltage for MIG/MAG
Correction for MMA
DOWN SLOPE for TIG
V16
Choke potentiometer
V17
Main switch
Fig. 3. Secondary control panel – panel in the space of the wire feeder
Pos.
Description
32
Switch Remote. ON – on the remote control
OFF – of the remote control
33
Switch Spool Gun. In the ON position one can weld with the Spool
Gun
34
Potentiometer for the BURNBACK time setting
35
Potentiometer for the initial wire speed setting
36
Potentiometer for the PRE GAS time setting
