20
jug is lifted off the base before the
end of the selected cycle, the milk
frother switches OFF.
The START/STOP button and
the icon of the selected function
switch OFF.
If the jug is replaced on the
heating base, the milk frother must
be reset.
When the jug is empty and has
cooled down, it can be washed.
ATTENTION!
• Always allow the appliance to
cool down before using it again.
• Always unplug the power cable
from the socket when the milk
frother has completed the
selected cycle.
USAGE TABLE
Use Symbol Quantity for two cups
Hot milk
200 ml of whole milk
Hot milk
with froth
200 ml of whole milk
Cold milk
with froth
200 ml of whole milk
Hot
chocolate
200 ml of whole milk and
50 g of chocolate flakes or
30 g of cocoa powder
• If you have chosen the milk
heating and frothing function,
the temperature at the end of
preparation is about 140 °F. If
you have set the hot chocolate
function, the final temperature is
about 167 °F.
CLEANING
ATTENTION!
• After use and before carry-
ing out any maintenance and
cleaning operations, remove the
power plug from the socket.
• Allow the appliance to cool
down before cleaning it.
Motor body
• DO NOT immerse or rinse the
motor body with the heating base,
power cable or plug in water or
other liquids.
• These parts must ONLY be
cleaned with a damp cloth and
then immediately and carefully
dried with a soft cloth (fig 2).
• The motor body must NOT be
washed in a dishwasher.
Jug, cover lid with holder
and whisk.
• To prevent froth or chocolate
residues from sticking to whisk and
the holder, we recommend rinsing
these parts under hot water as soon
as they have been used.
• These components can be hand
washed with warm water and
dishwasher detergent or washed in
a dishwasher.
We suggest placing the jug, cover
lid with holder and whisk in the
upper rack of the dishwasher to avoid
contact with the heating elements.
Any colour alterations on the
external bottom of the jug are
to be considered normal and do
not compromise in any way the
functionality of the milk frother.
• Do not use abrasive sponges or
substances to avoid damaging the
surface finish.
MDL13 Plissé Cappuccinatore USA.indd 20
MDL13 Plissé Cappuccinatore USA.indd 20
08/07/22 12:39
08/07/22 12:39
