19
ATTENTION!
• Always make sure that the cover
lid is closed tightly to prevent
milk from spilling.
• Always take care to respect the
minimum and maximum levels
indicated inside the jug. If the
maximum level is exceeded
during the preparation stage, hot
milk and froth could overflow
from the jug with the risk of
burns. If the minimum level is not
respected, the jug could overheat
and be damaged.
• DO NOT use the milk frother
without liquid in the jug.
• If the jug is lifted from the
heating base while it is ON, the
milk frother interrupts the
operating cycle.
DO NOT place the jug on any
sources of heat.
ONLY use it with the heating
base supplied.
. di utilizzarlo.
USING
THE MILK FROTHER
• The steel jug has level indicators
inside that help you in various
kinds of use:
- Max: maximum filling level for
warming milk ONLY – 350 ml
- Max: maximum filling level for
preparing frothy hot milk - 200 ml
- Min: minimum filling level - 100 ml
(fig. 5)
• Place the jug on a stable surface
and remove the cover lid.
• Depending on the function to be set,
pour the indicated amount of milk
into the jug (see “Usage table ”).
• Make sure that the whisk is
properly fitted into its holder.
• Place the cover lid on the jug
and press to ensure correct
closure between lid and jug. The
transparent cover lid allows you to
watch the set cycle.
• Place the jug on the heating base
and fit the plug into the power
socket. (fig. 6)
• Press the START/STOP button or
turn the program selector knob
to switch ON the milk frother.
The START/STOP button and the
function symbol on the program
selector knob come ON. If the
function is not set after 90 seconds,
the milk frother switches OFF.
• Set the desired function by turning
the selector knob in both directions.
Once the required function is
chosen, press the START/STOP
button again. (fig. 7)
• The START/STOP button and the
function symbol on the selector
knob come ON and the milk frother
begins the preparation procedure.
• When the milk frother has finished
the chosen cycle, it stops
automatically. The START/STOP
button flashes for 90 seconds and
then switches OFF; the icon for
the selected function also switches
OFF after 90 seconds.
• Hold the jug by the handle and lift
it off the heating base. (fig. 8)
• To pour the preparation, remove the
cover lid complete with support
and whisk (fig. 9) and use a spoon
to arrange the froth and milk or
chocolate in the cup. (fig. 10)
After use, the jug is hot. Place it
on heat-proof pad or similar to
avoid damaging the surface.
• If you wish to stop the milk frother
before the end of the selected cycle,
press the START/STOP button.
The START/STOP button flashes
for 90 seconds and then switches
OFF; the icon for the selected
function also switches OFF after
90 seconds.
If during the operating cycle the
MDL13 Plissé Cappuccinatore USA.indd 19
MDL13 Plissé Cappuccinatore USA.indd 19
08/07/22 12:39
08/07/22 12:39
