12
Assigning Knobs
Use the
LAYER
button to choose the layer you want to edit. Press
EDIT
PRESET
then wiggle a knob to select that knob for editing.
●
Press the
PAGE RIGHT
button.
●
Turn
VALUE/ENTER
to change the
MIDI continuous control
(CC)
number associated to the knob.
●
At this point, the knob is assigned and ready to use—You can push the
RECALL PRESET
button to return to the main menu and start twiddling
the knob. However, you can access additional MIDI options by pressing the
PAGE RIGHT
button. These options include:
- The MIDI channel of the knob. The default setting is
Comn
which
sends out the CC information on the
common
channel (see below) but
you can set the knob to send MIDI out on a channel from 1 to 16.
- The
Common MIDI
channel. All of the knobs set to
Comn
will be sent
on this channel.
- The name of your preset. Use the
PAGE LEFT
and
PAGE RIGHT
buttons to move the cursor forward and back and the
VALUE/ENTER
knob to select letters, numbers, and spaces.
Assigning Buttons
Push
EDIT PRESET
and press a button you want to assign.
●
Press the
PAGE RIGHT
button.
●
Turn
VALUE/ENTER
to change the function of
the button (you can choose between CC controllers,
MMC commands, or program/bank changes)
●
Turn
VALUE/ENTER
to change the button’s
MIDI control number
(or MMC command, or
program/bank change setting depending on what
function you’ve assigned to this button).
●
Press
PAGE RIGHT
once again to select the
MIDI
Channel
for this button. All buttons set to
Comn
will send
out MIDI information on the
Common MIDI
channel (see
below).
●
Press
PAGE RIGHT
to change the button’s
type
. Turn
VALUE/ENTER
to select
toggle
or
momentary
. (See the sidebar for an
explination of the difference)
●
Press
PAGE RIGHT
once again to access the
Common
MIDI
setting. All
buttons set to “Comn” will be sent on this channel.
●
Finally, press
PAGE RIGHT
to name your preset. See the section
above for more on how to name your patches.
“Toggle” and “Momentary”
button types
In Toggle mode, every button
press sends changes a MIDI
option from “off” to “on” (or
from “on” or “off”).
In Momentary mode, pressing
a button sends an “on”
command. Once you release
the button, an “off”
command is immediately
