11
RECALL SETUPS BUTTON
(Loading presets)
Presets are snapshots of the Photon X 25’s settings for its
three layers of knobs and buttons, its pitch and mod wheels,
and its AXYZ dome. 20 different preset locations are
available.
Recalling setups
Press
RECALL PRESET
. Turn
VALUE/ENTER
to
cycle through the presets. Press
VALUE/ENTER
to make
a preset active.
Copying presets from one location to another
Press
RECALL PRESET
. Then, press the
PAGE RIGHT
button. The lower
half of the screen will read “copy to ….” Twirl the
VALUE/ENTER
encoder
to select the destination location. Press
VALUE/ENTER
to copy the preset.
EDIT PRESET BUTTON
(Naming presets; assigning MIDI channels and controllers)
Press the
EDIT PRESET
button to access the settings for the current preset.
Assigning the MIDI Channel
Each preset is associated to a MIDI channel. You can assign any controller to a
different MIDI channel if you want, but there is still a “common” MIDI channel
for the preset.
Once you’ve pressed
EDIT PRESET
– and before you’ve touched any other
buttons or controllers – press the
PAGE RIGHT
button to access the
Common
MIDI
setting. Turn the
VALUE/ENTER
encoder to change the setting.
Naming the Preset
Press
PAGE RIGHT
again to change the name of the preset. Press
VALUE/ENTER
to begin editing. Then, use the
PAGE
buttons to cycle
through the characters; turn
VALUE/ENTER
to change the characters.
With the
Recall Setup
button
illuminated, move any
controller to see its midi
control assignment within the
most recently active preset.
