background image

Preface

 

 

 

This  document  is  intended  to  assist  the  service  technician  in  the  operation, 
maintenance and repair of  the Alesis device.  Together with the User Reference 
Manual, this document provides a complete description of the functionality and 
serviceability  of  the  Device.  Any  comments  or  suggestions  you  may  have 
pertaining to the document are welcome and encouraged. 

 

READ THIS!

 

In  addition  to  any  purchase  price  that  Alesis  may  charge  as  consideration  for  Alesis  selling  or 
otherwise transferring this service manual (“Manual”) to you, if you are not a service and repair 
facility  (“Service  Center”)  authorized  by  Alesis  in  writing  to  be  an  authorized  Service  Center, 
Alesis sells or transfers the Manual to you on the following terms and conditions: 

 

Only Service Centers authorized by Alesis in writing are authorized to perform service and repairs 
covered by an Alesis warranty (if any), and transfer of the Manual to you does not authorize you 
to be an authorized Service Center.   

Therefore, if you perform, or if the Manual is used to 

perform,  any  service  or  repairs  on  any  Alesis  product  or  part  thereof,  any  and  all 
warranties  of  Alesis  as  to  that  product  and  any  service  contract  with  Alesis  for  that 
product shall be voided and shall no longer apply for such product, even if your services

 

or repairs were done in accordance with the Manual.

 

 

All  service  or  repairs  done  by  you  or  with  reference  to  the  Manual  shall  be  solely  your 
responsibility, and Alesis shall have no liability for any such repairs or service work.   

All such 

service or repairs are performed at the sole risk of the person performing the service or 
repairs.   

You agree that all such work will be performed in a competent, professional and safe 

manner  at  all  times  and  to  indemnify  and  fully  hold  Alesis  and  its  successors  and  assigns 
harmless in the event of any failure to so perform. 

 

Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of 
resale or other transfer. 

 

As  the  owner  of  the  copyright  to  the  Manual,  Alesis  does  not  give  you  the  right  to  copy  the 
Manual, and you agree not to copy the Manual without the written authorization of Alesis.  Alesis 
has no obligation to provide to you any correction of, or supplement to, the Manual, or any new or 
superseding version thereof. 

 

Alesis shall have the right to refuse to sell or otherwise transfer repair parts or materials to you in 
its  sole  discretion.  You  shall  not  use,  sell  or  otherwise  transfer  spare  or  replacement  parts 
supplied by Alesis to you (i) to repair or be used in products manufactured for or by third parties 
or (ii) to any third parties for any purpose. 

 

You shall not make any warranties or guarantees with respect to the products of Alesis or the use 
thereof on behalf of Alesis or in your own name. 

 

The foregoing describes the entire understanding related to sale or transfer of the Manual to you, 
and  no  other  terms  shall  apply  unless  in  a  writing  signed  by  an  authorized  representative  of 
Alesis. 

 

All Trademarks are property of their respective companies. 

 
 
 
 
 
 
 

 

Confidential 

Alesis Service Manual 

8-31-0137-A 

Summary of Contents for IO|2













































































































Reviews: