manualshive.com logo in svg

Aleratec PortaCruiser 350108, User Manual

Share
Download
Aleratec PortaCruiser 350108 User Manual Download Page 7

www.aleratec.com

1

Introduction

Thank you for purchasing the HDD PortaCruiser. Please read this User Guide 

thoroughly before using this product. 

Product Features

The HDD PortaCruiser is a Hard Disk Drive Duplicator and Dual Disk RAID 

Controller. 

Duplicator Features

• 

1 to 1 SATA/IDE to SATA/IDE HDD duplicator

 

▪

Stand alone, no computer needed

 

▪

Complete cloning of partitions, boot sectors, and unallocated sectors

 

▪

LCD display shows full menu items and progress

 

▪

Supports SATA-to-SATA, SATA-to-IDE, IDE-to-SATA and IDE-to-IDE 

 

▪

duplication

Dual Disk RAID Controller Features

• 

RAID 0 mode (Striping) 

 

▪

RAID 1 mode (Mirroring)

 

▪

JBOD (Spanning mode) – combines two hard disk drives into one virtual drive

 

▪

Normal Mode – access your dual drives separately

 

▪

NOTE: 

In either mode, you must reset the unit when attaching/removing hard 

drives so that the system can re-scan the drives.

Summary of Contents for PortaCruiser 350108































































Reviews:

No comments

Brands by name

Popular brands

Load more brands