www.aleratec.com
34
Using the HDD PortaCruiser
Duplicator Mode
Advanced Setup Menu: 8-04 H/W Diagnostic
This function is used to test various components of the HDD PortaCruiser.
Press and hold
1.
ESC
for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
Use the arrow buttons (
2.
or
) to select “H/W Diagnostic”. The following
screen will be displayed.
Press
3.
ENT
to begin the diagnostic tests. The following tests will be
preformed: Button Test, Self-Test of SDRAM, Hardware Connection Test,
and Flash Test. Follow the on screen prompts to complete each test. All
test results will be shown in the display panel.
Note:
The Button Test allows you to push the buttons and confirm that they
are working properly. A button press will indicate on the LCD screen.
DO
NOT
press the Reset button during this test as it will reset the unit. Press
and hold the
ESC
button to exit this portion of the test.
When all tests are complete the following information will be displayed.
4.
LCD Test Start
Button Test
→
SDRAM Test:
8192Kbytes OK
Test IDE 0/1
OK
Flash Test: OK
Test finished
ENT
8. Adv Setup
ESC
RESET
MUTE
ENT
8-04. Adv Setup
H/W Diagnostic
ESC
RESET
MUTE
ENT
Test Finished
ESC
RESET
MUTE
