Aleratec 1:5 HDD Copy Cruiser IDE/SATA, User Manual

Page: 44 / 59

www.aleratec.com 38
Using the 1:5 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
Adv Setup: Read Error Skip
This function can be enabled to ignore any error that occurs during copying.
By default, the 1:5 HDD Cruiser will halt the copy operation when it encounters
an unreadable area of the source hard disk and display an error. Enabling this
option will ignore any bad sectors on the source hard drive by skipping over
them.
Warning : Setting this function to “On” may result in corrupt data on
copied hard drives.
1. Press and hold ESC for about 3 seconds to access the “Adv Setup” menu.
The following screen will be displayed.
2. Use the arrow buttons (

or

) to scroll to “Read Error Skip”. The
following screen will be displayed.
3. Press
ENT
to display the current configuration setting. The default setting
is “Off”.
4. Press the arrow buttons (

or

) to toggle the option “On” or “Off”. After
changing a setting, remember to press ENT to save it.
ENT ESC


11. Adv Setup
ENT ESC


Read Error Skip
Off
ENT ESC


11-01. Adv Setup
Read Error Skip