Aleratec 1:5 HDD Copy Cruiser IDE/SATA, User Manual

Page: 25 / 59

www.aleratec.com 19
Using the 1:5 HDD Copy Cruiser IDE/SATA
Main Menu
ReScan Bus
The “ReScan Bus” function causes the 1:5 HDD Cruiser to redetect connected hard
drives. This can be used when you change drives without restarting the system.
1. Use the arrow buttons (

or

) to select “ReScan BUS”. The following screen
will be displayed.
2. Press ENT to select. The system will prompt you to confirm that you wish to
proceed.
3. Press
ENT
to begin the rescan, during which the following screen will be
displayed.
Note: The order of scanning is CH:0 ~ CH:4.
4. When the rescan is complete, the following screen will be displayed.
ENT ESC


6. ReScan BUS
ENT ESC


ReScan BUS Now?
Yes
ENT ESC


Bus re-scan OK!
Found 6 Devices
ENT ESC


Detect Drives
Please wait...