Aleratec 1:11 HDD Copy Cruiser IDE/SATA, User Manual

Page: 30 / 58

www.aleratec.com 24
Using the 1:11 HDD Copy Cruiser
Main Menu
Setup
The “Setup” menu contains configuration options for the 1:11 HDD Copy Cruiser. It
is suggested to use the factory defaults for optimum performance.
1. Use the arrow buttons (

or

) to select “Setup”. Press ENT to select. The
following screen will be displayed.
Note:
After changing any of the configuration options, you must press ENT
to accept the change. Once all changes are complete, press ESC to exit the
Setup menu. The following screen will be displayed.
2. When the configuration changes have been saved, the following screen will be
shown.
ENT ESC


10. Setup
ENT ESC


Saving config...
Please Wait...
ENT ESC


10. Setup