Alencon SPOT: Installation,
Operation, and Maintenance Manual
12 |
P a g e
F
IGURE
7:
AID
M
OUNTED ON
S
TRUT
C
HANNELS
5.2 Mounting Procedure
–
SPOT/BOSS Side Mounted
1.
The AID has 4 mounting ‘legs’
that can pivot from each corner of the enclosure where
they are attached (see Figure 8).
2.
Adjust the positioning
of the ‘legs’ to
line them up with the grooves on the side of the
SPOT/BOSS chassis (see Figure 9).
3.
The AID can be mounted on either side of the SPOT/BOSS as both sides have mounting
grooves.
4.
Use the separately included 4 x 1/4"-20 thread cutting screws to fasten the AID onto the
side of the SPOT/BOSS through the mounting grooves (see Figure 10).
F
IGURE
8:
AID
(
BACK VIEW
)
M
OUNTING
L
EGS
H
IGHLIGHTED
