Visit our website at
www.alemlube.com.au
or
www.alemlube.co.nz
NSW/ACT
TEL: (02) 9677 1555
FAX: (02) 9675 1155
QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9302 4199
FAX: (08) 9303 2095
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (64) 9 447 1007
FAX: (64) 9 447 1008
3 of 16
SAFETY INSTRUCTION
IMPORTANT
•
The diesel driven diesel & water pump is designed to give safe and dependable service if operated according
to instructions.
•
Read and understand the User Manual before operating the pump.
Failure to do so could result in personal injury or equipment damage.
•
The muffler becomes very hot during operation and remains hot for a while after stopping the engine.
Be careful not to touch the muffler while it is hot. Let the engine cool before storing the water indoors.
•
The engine exhaust system will be heated during operation and remain hot immediately after stopping the engine.
To prevent scalding, pay attention to the warning marks attached to the water pump.
•
Diesel fuel is extremely flammable and explosive under certain conditions. Refuel in a well-ventilated area with
the engine stopped. Do not smoke or allow flames or sparks in the refuelling area or where diesel fuel is stored.
Do not overfill the tank. After refuelling, make sure the tank cap is closed properly and securely.
•
Be careful not to spill fuel when refuelling. Spilled fuel and fuel vapor may ignite. If any fuel is spilled,
make sure the area is dry before starting the engine.
•
Exhaust gas contains poisonous carbon monoxide gas, exposure can cause loss of consciousness and may
lead to death. Never run the engine in an enclosed or confined area.
•
Always make a pre-operation inspection before you start the engine.
You may prevent an accident or equipment damage.
•
Do not allow children to operate the pump. Keep children and pets away from the area of operation.
•
Know how to stop the pump quickly, and understand the operation of all the controls.
Never permit anyone to operate the pump without the proper instructions.
•
Place the pump on a firm, level surface rest the pump overturn.
•
To prevent fire hazards and to provide adequate ventilation, keep the pump at least 1 metre away from building walls
and other equipment during operation. Do not place flammable objects close to the pump.
•
Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewellery, and long hair can be caught in moving parts.
•
Do not operate pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
The engine creates spark, which may ignite the dust or fumes.
•
Do not overload the pump. Use the correct pump for your application.
The correct pump will do the job better and safer at the rate for which it is designed.
2