Visit our website at
www.alemlube.com.au
or
www.alemlube.co.nz
NSW/ACT
TEL: (02) 9677 1555
FAX: (02) 9675 1155
QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9302 4199
FAX: (08) 9303 2095
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
3
Mobile Waste Oil Drainer / Extractor
OWNER’S TECHNICAL MANUAL
30100
WARNING
1.
Please read this Manual Book carefully and fully understand it before operation.
2.
In order to avoid the aging of the rubber parts, do not expose the machine in the sunshine;
do not deposit the machine in a moist place, it must be stored in a dry place with good ventilation.
Because of the multi functions, the machine is equipped with many accessories, it must be cared
by a special technician.
3.
This machine has been tested strictly before leaving our factory, but the operator must obey our operation
regulations. Please do not try to take apart and repair it by yourself, if you meet with any faults, please contact
our local distributors or our company.
4.
After using, always cut off connection with air compressor and recover all the pipe to its original place.
5.
Do not lower than the min. air inlet required pressure. Do not exceed the max. air inlet required pressure.
6.
Do not dismantle this machine by unqualified or unauthorized personnel. Otherwise will avoid warranty.
7.
If you have any inquiries, please contact our local distributors or service offices.
8.
Air inlet & Oil drain: Ball valve must be closed operation confirmation.
TRANSPORT AND UNPACKING
When unpacking, check to make sure that all the parts are included. Refer to the Assembly section,
and the Assembly Drawing and Parts List at the end of this manual.
For transport of the packaged product, refer to (Fig.1).
Once the product has been unpacked, check that the instructions manual is there, that the material is complete
and there are no parts which have been visibly damaged. If any parts are missing or broken, please contact
with local distributor as soon as possible. Remove the contents of the packages and place them in a storage
area inaccessible to children or animals.
In the package, you will find:
1.
One Complete Oil Tank
2.
One Oil Collecting Bowl/tray
3.
One Strainer
4.
Probes 6 pcs with sleeve
5.
User’s Manual
ASSEMBLY INSTUCTIONS
Oil Tray (FIG 2)
1.
Open the carton to take out the oil tray, check to see if there is any damage.
If so, please contact with your distributor immediately.
2.
Pull out the lift pole and install the oil tray on the lift pole.
3.
Install and fix the oil tray, strainer together.
4.
Ensure the lift pole is perpendicular to the equipment.
5.
Tighten the screw.
OPERATION INSTRUCTIONS
Oil Collections (FIG 3)
1.
Lift the vehicle up, then Push the machine to the place right
under the engine oil outlet.
2.
Turn on ball valve at first.
3.
Open the ball valve under the oil tray and unscrew
the oil drain plug of engine.
4.
Then oil transferring from oil tray to oil tank.
5.
Screw on the drain plug of vehicle.
Fig 1
Fig 2
