SER 8571-5
Portable Hand-Operated Pump
Revision (12-09)
8
Alemite LLC
Outlet Body
7. Install and seat Gasket (
34
) into the bottom of Outlet
Body (
28
).
8. Install the Rod assembly into the Outlet Body.
9. Install and seat Gasket (
27
) into the Outlet Body.
10. Install O-Ring (
26
) carefully past the cross-hole on the
Rod.
11. Screw Packing Nut (
25
) into the Outlet Body.
12. Tighten the Packing Nut securely.
13. Install the Tube assembly over the Rod assembly and
screw into the Outlet Body.
14. Tighten the Tube securely into the Outlet Body and at
the same time the Foot Valve Body into the Tube.
Attach Pump Tube to Lever and Cover
15. Screw Knob (
10
) onto Bracket and Lever Assembly
(
9
).
16. Install Link (
11
) into the Bracket and Lever
Assembly.
17. Install Screw (
8
) that secures the Bracket and Lever
Assembly to the Link.
18. Install Nut (
12
) onto the Screw.
• Tighten the Nut securely.
19. Install the Bracket and Lever Assembly and Link onto
the Pump Tube Assembly.
20. Install Pin (
13
) that secures the Link to the Pump Tube
Assembly.
21. Install Pin (
7
) that secures the Bracket and Lever
Assembly to the Pump Tube Assembly.
22. Install Retaining Rings (
6
) onto the end s of both Pins.
23. Screw Nipple (
3
) [with thread sealant on each end]
into the Outlet Body.
• Tighten the Nipple securely.
24. Screw Electronic Meter (
2
) onto the Nipple.
• See
Figure 2
for the proper orientation of the Meter.
• Tighten the Meter securely.
25. Position the Pump Tube Assembly onto Cover (
14
) as
illustrated in
Figure 2
.
Figure 5
Pump Tube Assembly 328255-C4 - Section
Refer to
Figure 3
Parts List
for Parts Identification
1-800-548-1191-http://[email protected]
