Alecto DVM-65 User Manual Download Page 15

15

6.9 PROBLEMS:

•  no image, no sound:

 

– are the parent unit and baby unit switched off? (battery charged, 

battery full?)

 

– is the parent unit within range of the baby unit?

 

– is the baby unit switched off because no sound is being detec-

ted?

 

– maybe the display of the parent unit is turned off with the   

button?

 

– is the volume at the parent unit set to 0 (off)?

•  If the above is all in order, remove the adapters from the wall 

sockets, take the rechargeable battery out of the parent unit, wait 

at least one minute and then reconnect everything. Now, switch the 

parent unit and baby unit back on.

•  If you still receive no images or sound, please contact the 

customer service of Alecto via the phone number 073 6411 355 

(Netherlands), 03 238 5666 (Belgium), 0180 503 0085 (Germany) 

or via internet www.alecto.nl

7  SPECIFICATIONS

Range: 

up to 50 meters indoors

 

up to 300 meters outdoors

Parent unit power:   

3.6V NiMH battery pack, 750mAh

 

6VDC 600mA power adapter

 

 (incl.)

 

model: S003IV0600060

Baby unit power:  

6VDC 600mA power adapter 

 

 (incl.)

 

model: S003IV0600060

Frequency:   

2.4GHz, digital frequency hopping 

 

(FHSS) / 21 channels

Display:  

2.0” color LCD display

 

QVGA 220*176 pixels

Recharging time parent unit battery: +/- 10 hours (*)

Life-span parent unit battery  6~10 hours (*)

Temperature sensor range: 

0°C - 50°C

Accuracy: 

± 2°C (bij 25°C)

*: 

the times mentioned above are references only and depend on the 

usage, condition and quality of the batteries.

Summary of Contents for DVM-65

















Reviews: