Alecto DVM-65 User Manual Download Page 14

14

6.4 EAVESDROPPING/WIRETAPPING:

•  Eavesdropping/wiretapping of the signals from this baby video mo-

nitor is nearly impossible. Not only must one be within range of the 

baby video monitor, one also needs some very costly equipment.

6.5 MAINTENANCE:

•  Only clean the baby monitor with a moist cloth; never use chemical 

cleaners. Before any cleaning, you must disconnect the adapters.

6.6 RANGE:

•  The baby display monitor has a range of up to 300 meters in an 

open field and up to 50 meters indoors; this range depends on local 

circumstances. When the units get out of range from each other, 

the display will first ‘freeze’ for several seconds (no motion) while   

flashes on the display, followed by   after another few seconds.

6.7 DELAY IN IMAGES AND SOUND:

•  The baby unit transmits the images and sound to the parent unit 

in digital blocks. The parent unit converts these signals back to a 

recognizable image and a comprehensible sound. Therefore, there 

is a small delay between the moment of movement and making 

sounds and the display and sounds of the parent unit.

•  Besides that, the sounds and images on the parent unit are not 

exactly simultaneous.

6.8  ENVIRONMENT AND DISCARDING:

•  The packaging of this baby video monitor can be discarded as 

waste paper. However, we advise you to save this packaging so you 

can adequately protect the devices for transportation.

• 

Faulty or exhausted batteries or battery packs should be 

taken to your local depot for small chemical waste or to dedi-

cated battery collection points. Never dispose of batteries or 

battery packs as normal household waste.

•  In case the baby video monitor is being replaced, please return it to 

your supplier; they will guarantee environment-friendly processing.

Summary of Contents for DVM-65

















Reviews: