![Alecto DVM-65 User Manual Download Page 12](http://html1.mh-extra.com/html/alecto/dvm-65/dvm-65_user-manual_2893447012.webp)
12
5 MULTI CAMERA
5.1 INTRODUCTION:
You can register up to a maximum of 4 baby units (cameras) on the
DVM-65 parent unit. Separate cameras are available via the service
department of Alecto via 073 6411 355 (Netherlands), 03 238 5666 (Bel-
gium) or via internet www.alecto.nl
Read paragraph 4.2 (Multi-camera) for instructions on how you can use
the parent unit to switch to the image from other cameras.
5.2 REGISTERING ADDITIONAL CAMERAS:
1. Connect the power adaptor supplied with the camera to the new
camera and turn the camera on (also see paragraph 3.1 of this
manual).
2. Press the
M
button on the parent unit and use the or button to
select the option.
3. Use the and buttons to select the number you want to assign
the camera to and press the
M
button.
4. An hourglass will appear on the display to indicate that the parent
unit is currently searching for the new camera.
5. Press and hold the PAIR button on the baby unit until after several
seconds the image of the new camera appears on the display of the
parent unit.
The new camera is now registered and ready for use.
5.3 LOG OUT ADDITIONAL CAMERAS:
Follow the steps below to deregister faulty cameras or cameras no
longer in use:
1. Press the
M
button on the parent unit and use the or button to
select the option; the display will now show the numbers of all
registered cameras.
2. Use the and buttons to select the camera you want to deregis-
ter.
3. Press and hold the TALK button until X and V appear on the display.
4. Use the and buttons to select the V option to deregister the
camera (or select X to cancel the deregistration)
5. Press the
M
button to confirm the deregistration.
Summary of Contents for DVM-65
Page 1: ...USER MANUAL DVM 65...